Hey i gotta slight buzz/hum coming from my Dean ml dimebag tribute guitar. i just put a seymour duncan dimebucker pickup in the bridge. all my grounds and solder joints look fine and i have continuity all over the guitar... when i touch the metal on the toggle switch, the jack input, the bridge and strings and the neck pickup the buzz/hum goes away.. i replaced the pot and resoldered it again for that pick up and still get buzz.. any ideas? I have tested my 2 other guitars on the same amp and patch chord to make sure they arent the issue aswell.. Im kinda stumped now lol. any help is greatly appreciated
should add that the noise does get louder when i touch the pickup i installed or if i touch the height adjustment screws for the pickup but it gets quieter if i touch the height adjustment screws on the neck pickup (stock i didnt change neck pickup the stock pickup has a metal baseplate but the new dimebucker the screws go into a plastic baseplate) but if i touch the strings the noise goes away then i can touch the pick up i get no noise... ive taped any piece of wire that cud possibly touch anything to ground out aswell. im stumped lol
the hum/buzz/noise disapears when you turn the volume pot to zero or when you turn the tone down to zero...
Any ideas anyone?
lol thanks in advance
should add that the noise does get louder when i touch the pickup i installed or if i touch the height adjustment screws for the pickup but it gets quieter if i touch the height adjustment screws on the neck pickup (stock i didnt change neck pickup the stock pickup has a metal baseplate but the new dimebucker the screws go into a plastic baseplate) but if i touch the strings the noise goes away then i can touch the pick up i get no noise... ive taped any piece of wire that cud possibly touch anything to ground out aswell. im stumped lol
the hum/buzz/noise disapears when you turn the volume pot to zero or when you turn the tone down to zero...
Any ideas anyone?