Some questions about guitar hardware

[Zach Justus]

I have a used Schecter Synyster Standard that i got from a friend as a gift. I want to replace the pickups with synyster’s signature pickups but I’m not sure which ones I’m supposed to get. Like on the store it says theres the traditional set, the humbucker set and the tremolo set. Second the floyd rose special on it is pretty worn down which floyd would be a good replacement? Any help or suggestions would be greatly appreciated.

 

[idssdi]

On a guitar with a tremolo the pickups tend to be wider because the bridge is wider so you probably should get those. Which Floyd to get I don’t know.

 

[Dan Shipway]

For floyds the ones that are commonly used on schecters (apart from the 1500 which is patented by schecter and not commercialy available) is the floyd 1000 series, you could also go for an original series.

 

[BrandonJ]

Probably replace the floyd with the same model as the one on the guitar

 

[Luke G]

You would want the tremolo spacing for the pickups, and you should get a original Floyd Rose, or a Floyd Rose 1500 if you can get your hands on one.

 

[Noah Berends]

Luke got it. Floyd Rose spaces the strings different, and so tremolo-spaced pickups will pick it up properly.
As far as which Floyd to get to replace, if I were buying I would be erring on the side of caution and buying whatever was already in it, but you could definitely upgrade quality if possible.