• Join the A7X Discord!

    We're updating the community and moving all social content from the community to the Discord. All lessons related conversations will still take place here though! Join the Discord below and view the full announcement for more details

    JOIN THE DISCORD VIEW THREAD

String Fix

Dominik Gräber

Hot Topic Tourer
Contest Winner!
  • Nov 11, 2019
    2,787
    1
    5,990
    26
    Saarland
    www.instagram.com
    6
    I assume they come with standards which is 10 - 46 I believe. If it came in drop d it might have been a heavier set. Anyway I would recommend changing all strings
    If you haven't restrung a guitar with floyd rose before you might want to look into how to do it before changing, to avoid trouble. We had some really helpful threads on this.
     
    Reactions: John Robinson

    MidnightA

    Garage band Groupie
    Nov 11, 2019
    14
    12
    No I haven’t restrung anything with a Floyd Rose before. I’ll look into it. Thanks for your advice!
     
    Reactions: Dominik Gräber

    John Robinson

    Music Theory Bragger
    Nov 11, 2019
    367
    504
    Nashville tn.
    Some great advice in this comment
     
    Reactions: Dominik Gräber

    Jacques

    Campfire Attention Holder
  • Nov 29, 2019
    168
    354
    IL
    12
    Can't go wrong with some ernie ball skinny top heavy bottom 10-52! (My guitar almost always stays in dropped D tuning) They are super tough! I have a floyd rose myself and they rarely broke on me even when doing some obnoxious tremolo stuff. And I really liked how quickly they "stretched" to hold their tune after you finished re-stringing. It can get quite frustrating tuning your guitar 10-15 times with a floyd while breaking the strings in!

    I just switched to the ernie ball Paradigm 10-52 and LOVE them, however i spent half a day breaking them in!
     

    MidnightA

    Garage band Groupie
    Nov 11, 2019
    14
    12

    Would the sound be different using the Ernie Ball Skinny Top Heavy compared to Ernie Ball Slinky?
     

    Dominik Gräber

    Hot Topic Tourer
    Contest Winner!
  • Nov 11, 2019
    2,787
    1
    5,990
    26
    Saarland
    www.instagram.com
    6
    Would the sound be different using the Ernie Ball Skinny Top Heavy compared to Ernie Ball Slinky?
    I think that's more of a preference thing. I think you say that thicker strings sound a bit darker but I don't really think too much that you would really hear it. The biggest difference would be the thickness and also the hardness. Heavy bottoms will be thighter than slinkies so the top three strings will be a little harder to play, cause they have more tension. Not too much though, I use them for drop d and it works for me. I used to use them for drop c as well. And then of course, thicker strings will be more durable if you abuse them with a floyd
     

    MidnightA

    Garage band Groupie
    Nov 11, 2019
    14
    12

    Haha, if you say that those are a bit tougher to play with, then I'll go grab the Ernie Ball Slinky for it!
     

    Ed Seith

    Supreme Galactic Overlord
    Staff member
    Legend+
  • Nov 11, 2019
    3,882
    15
    6,603
    54
    Marana, AZ USA
    soundcloud.com
    35
    So, I just wire cut all of the strings. The remaining strings are just sticking out from the floyd rose. What's a away to remove them from the bridge?

    You have to use the allen wrench to loosen the screws holding the little square blocks squeezing the strings.

    Then take the time to understand what you're fiddling with:
     

    Ed Seith

    Supreme Galactic Overlord
    Staff member
    Legend+
  • Nov 11, 2019
    3,882
    15
    6,603
    54
    Marana, AZ USA
    soundcloud.com
    35
    The long silver screws at the bottom. The black ones are your fine-tuners, for when a string is slightly out of tune and the nut is locked. If you look at one of the silver screws, it goes through the gold back plate and into the gold saddle where it presses the black block into the string and compresses it against the front of the gold saddle.

    Loosen one of the silver screws with one of the allen wrenches that came with the guitar (find the one that fits PERFECTLY). The black block WILL fall out if the guitar is not flat on a table or other surface, and they're a BEAR to find on carpeting, so DON'T LET THAT HAPPEN.

    The short silver screws are for intonation and you should NEVER touch them until you know what you're doing with them. The two gold pivot screws that go into the body are for adjusting the bridge height overall, and you should also not touch these unless you have a specific reason you understand.
     
    Reactions: MidnightA

    MidnightA

    Garage band Groupie
    Nov 11, 2019
    14
    12

    So I've gotten a little frustrated trying to attempt the string change myself. When the E string snapped, it was easy to remove the string by pulling on it. When I wire cut the remaining strings, the entire bridge collapsed into the cavity. Obviously, a bad idea! The steep slope made it difficult to unscrew the silver screws. And I've realized that the fine tuner block on the E string was also missing. Since I don't really have the patience to change them myself at the moment, so I just had someone at Guitar Center restring it for me.

    However, thank you for your video! I wish I've gotten to it before I attempted the restring process. I will definitely follow it as a reference next time, with better strings.