We're updating the community and moving all social content from the community to the Discord. All lessons related conversations will still take place here though! Join the Discord below and view the full announcement for more details
Since they've got the Floyds, action adjustments have a few extra steps. Is the action too high before or past the 12th fret? You're gonna want to make small adjustments at a time, but be aware with a Floyd that you need to make the adjustments equally and together since it operates on a knife point pivot.
Since they've got the Floyds, action adjustments have a few extra steps. Is the action too high before or past the 12th fret? You're gonna want to make small adjustments at a time, but be aware with a Floyd that you need to make the adjustments equally and together since it operates on a knife point pivot.
I'm not even sure if it is too high tbh. What made me notice was when I played to 20th fret on the first string, it didn't ring out and instead made the sound of the 21st. Also I'm pretty new to this, what do you mean by knife point pivot? Thanks for the help
I'm not even sure if it is too high tbh. What made me notice was when I played to 20th fret on the first string, it didn't ring out and instead made the sound of the 21st. Also I'm pretty new to this, what do you mean by knife point pivot? Thanks for the help
Oohh I see, that sounds to me like the 21st fret is high or the 20th fret is low and that's what's happening. That's a bit more difficult to fix unfortunately; you *could* raise the action on that end to possibly remedy it, but that would adversely affect playability for everything else. Does it do it on any other strings/frets?
Also my bad, knife point is just the term for the very thin and precise edge that the Floyd balances on.
Oohh I see, that sounds to me like the 21st fret is high or the 20th fret is low and that's what's happening. That's a bit more difficult to fix unfortunately; you *could* raise the action on that end to possibly remedy it, but that would adversely affect playability for everything else. Does it do it on any other strings/frets?
Also my bad, knife point is just the term for the very thin and precise edge that the Floyd balances on.
Ohh okay cheers. I haven't found any other frets doing the same thing so I'm not sure what's going on there. Idk if this could help, the bridge itslef is slightly tilted away from the neck. Should it be completely parallel to the body? I'll attach an image to show what I mean.
You can barely see, but it's tilted down on the right side.
Ohh okay cheers. I haven't found any other frets doing the same thing so I'm not sure what's going on there. Idk if this could help, the bridge itslef is slightly tilted away from the neck. Should it be completely parallel to the body? I'll attach an image to show what I mean. View attachment 2281
You can barely see, but it's tilted down on the right side.
Yes, it’s best to make sure it’s parallel with the body. If you’re comfortable doing it yourself, what you’ll want to do with the bridge leaning back is loosen the springs in the back of the body. Turn the screws on the claw to loosen, and do it a half turn at a time, then retune to proper tension and repeat until the bridge lays flat.
Yes, it’s best to make sure it’s parallel with the body. If you’re comfortable doing it yourself, what you’ll want to do with the bridge leaning back is loosen the springs in the back of the body. Turn the screws on the claw to loosen, and do it a half turn at a time, then retune to proper tension and repeat until the bridge lays flat.
I'm not even sure if it is too high tbh. What made me notice was when I played to 20th fret on the first string, it didn't ring out and instead made the sound of the 21st. Also I'm pretty new to this, what do you mean by knife point pivot? Thanks for the help