strings slip of the fretboard when bent

[gilad zegman]

hello guys,
i have the synyster custom s guitar and its awesome. but i have one problem with it!
when i bend or vibrate the high e/low E string they tend to slip of the neck. it happened after i took the guitar for the first setapp.
do you guys know the problem? and most importantly how to fix it?

 

[Gabriel Corso]

Man, I would say that I luthier can take care of your guitar and fix it.
I don’t think it is a very bad issue to be honest.
I hope you get it fixed and enjoy your playing again haha.
Take care buddy! Good luck

 

[Rebecca Brotherston]

It’s hard to tell without seeing it. Maybe a new nut if the placement is off center… or maybe the groove in the nut is too shallow.
When you do bends try bending up so it does fall off

 

[Rebecca Brotherston]

*doesn’t fall off

 

[Matt Wildman]

Sounds like a pretty common problem. I had that issue with my epiphone les Paul and It happened quite often. I have a Schecter Omen 6 now, and it doesn’t happen as often but I think it can happen on any guitar depending in how much you bend the string towards the edge of the neck. So I wouldn’t really worry about it. Unless someone else tells you otherwise because I’m sure others have had more experience with this issue more than I have.